I`ll tell you all about what I do to the Z28
350 build up
took my 350 to get magnafluxed and it passed I plan on boring it out .060" over and putting a 3.750" forged crank in. more to come as I build it

Ok so this is what you`ve been waiting for the parts list so for this is what I have

383 stroker kit:
Scat steel 3.750" crank
Scat forged 5.7" rods
Kieth Black hypereutectic pistons



I have to replace the floors the drivers side floor rotted out front and back the passenger side floor is a little rotted front and back and the right rear corner rotted out looks like I bought it just in time to save it

Friday March, ,2002: Well I finally got my Z28 up to Welland to work on the floors

Sat. March, ,2002: Took the interiour out of my Z28 took a couple of hours to do it

Sunday March, ,2002: Tryed to fix the brakes my brother in law broke a very important piece for the brake line so that slowed us right down wached the race ass hole marlin 40 won Dale jr 8 took 4th

Friday March,29,2002: well I`m 20 today and I got the brakes done thats it for today

Sat. March,30,2002: Well we made the pass. side pan man that was hard!!! we made it in 3pieces it took the hole day just to do that pan

Sun. March,31,2002: we got the drivers side pan done it was ALOT easyer to make then the pass. side no race today F*ckin easter

Mon. March,31,2002: I worked by my self today I grinded the hell out of the floors charged the Battery and put two bolts back in the headers runs beter now

Sat. April,6,2002: Finally got the welder so we could weld the foors in my Zed we welded all the pans and some paches in exsept the drivers side and pass. side had to do some grinding and buffing so the weld would form good

Sun. April,7,2002: We welded the pass. side in but the welder had to leave so thats all we got done today I also washed the car it needed it

Sat. April,13,2002:well we made the drivers side fit better in place

Sun. April,14,2002: I did alot of grinding and buffing so we`d be ready for next weekend

Sat.April,21,2002: well I finally got the the drivers side welded in and a couple of paches

Sun.April,22,2002: Made the inside rocker panel pach on the pass. side and welded it in had to drop the exhaust to do that. Dale jr WON at talladaga 1st win for Chevy this year

Sat.May,04,2002: Put interior back in

Sun.May,05,2002: Saw a Dale Earnhardt car that was cool took a valve apart washed my Z28

Sun.May,12,2002: Did all the valve seals ajusted the valves and replaced valve covers with crome ones and gaskets replaced collector gaskets and replaced header gaskets

Sat.May,25,2002: Got my trip goin DRIVING